If lit steadily, open door
|
Код ошибки |
Описание |
|
C2 |
Transfer corona problem |
|
CH |
If lit steadily, open door or other interlock. If flashing, developer unit not installed or not connected properly |
|
H2 |
Fuser thermistor |
|
H3 |
Fuser overheat. Triac pinched wire |
|
H4 |
Low fuser temperature. Lamp, thermal fuse, thermistor, connection |
|
L1 |
Scan problem. Did not leave home position |
|
L2 |
Scan left home, but did not complete scan |
|
L3 |
No return scan |
|
L4 |
Drive problem |
|
L5 |
Lens problem |
|
L9 |
Sorter index. If 0 is flashing, sorter index home sensor did not actuate. If 1 is flashing, sorter bottom actuator remained actuated |
|
U1 |
Battery. Replace battery (might have 2) and do simulation 13 to reset |
|
U2 |
Communication problem within boards. To reset, jumper test points W2 & U2 |